I have a question regarding blue ring tester. When testing a good flyback all lights will light contineous or will flash all the ligth only?
It depends on the flyback belong to how many inches of the Monitor. Generally the 14 to 17″ will show from 7 to 8 LEDs. 19″ and above will have about 4 to 5 LEDs
I used the test coil that is included in the set. and my finding only lit all the lights for a seconds and gone out. i mean the light is not continually on while still connected to the coil, is it normal or not?
Try scratch off the coil wire tip as it was laminated and do not have a good contact. If after removed the lamination and the LEDs still go off then the meter may be not fully assembled and need to recheck again. A good meter should show steady 8 LEDs
It depends on the flyback belong to how many inches of the Monitor. Generally the 14 to 17″ will show from 7 to 8 LEDs. 19″ and above will have about 4 to 5 LEDs
I used the test coil that is included in the set. and my finding only lit all the lights for a seconds and gone out. i mean the light is not continually on while still connected to the coil, is it normal or not?
Try scratch off the coil wire tip as it was laminated and do not have a good contact. If after removed the lamination and the LEDs still go off then the meter may be not fully assembled and need to recheck again. A good meter should show steady 8 LEDs
No comments:
Post a Comment